How to: Microsoft CRM 2011 Integration example (Part 2 – Get data out of CRM 2011)

17 January 2012 · BizTalk, C#, CRM, CRM2011, Custom Activity, How to, WCF

First things first, at this point in time I assume

• you’ve read the previous post
• downloaded and installed the CRM2011 SDK
• have a working CRM2011 environment to your proposal.
• you have an account for CRM2011 with sufficient rights (I’d recommend System Administrator)
• have visual studio 2010 installed.
• downloaded and extract my visual studio example solution

So you’ve met all the requirements mentioned above? Good; let’s get started.

Note: all code should be used for Demo/Test purposes only! I did not intent it to be Production Grade. So, if you decide to use it, don’t use it for Production Purposes!

Building your Custom Workflow Activity for CRM2011

Ensure your references are correct

Once done, we are going to re-add these references; so right click on the References folder of the Crm2011Entities Project and click ‘Add Reference’

Now click on the ‘browse’ button, in the add reference dialog window

Now browse to your Windows CRM 2011 SDK BIN folder (in my case: B:InstallMicrosoft CRMSDK CRM 2011bin) and select the following two assemblies:

• microsoft.xrm.sdk
• microsoft.xrm.sdk.workflow

Now repeat the above mentioned steps for the other project

Generate a strongly typed class of all your existing CRM entities.

Q&A session

Me: Well let’s add a file to this project, shall we?

You: Hmmm, what file you ask?

Me: Well this project will hold a class file which contains all the definitions of your CRM 2011 Entities.

You: O no, do I need to create this myself?

Me: Well lucky you, there is no need for this.

You: So how do I create this file then?

Me: Well just follow the steps mentioned below

So let’s fix this, and open up a command prompt with administrator privileges.

Now navigate to your CRM 2011 SDK Folder (in my case this would be: B:InstallMicrosoft CRMSDK CRM 2011bin)

Note: Before you proceed, ensure that you know the url of the  the CRM2011 OrganizationService. Just test it, by simply browsing to this address, and if everything goes right you should see the following page:

 

now type in the following command (and replace the values between <….> with your values (see readme.txt)):

Once completed, you should be presented with the following output:

The actual file should be written to the location you set and in my case this is: c:Temp

Once the actual class has been generated, open Visual Studio and right click on the CRM2011Entities project and select  ‘Add Existing Item’

Browse to the directory in which the generated class was saved, and select the generated class.

At this point you should be able to compile the complete solution, so go ahead and do so.

Note: The source code; includes comments which should be self-explanatory

Making the custom workflow activity available in CRM2011.

In order to do this we will use this nifty application which comes with the CRM2011 SDK. This application is called ‘pluginregistration’ and can be found in the subdirectory tools/pluginregistration of the CRM2011 SDK (in my case the location is

B:InstallMicrosoft CRMSDK CRM 2011toolspluginregistration)

Note: As you will notice, only the source code of the pluginregistration is available; so you need to compile it; in order to use it.

You will be presented with the following GUI:

Now click on “Create New Connection”

Fill out the connection information, consisting of:

• Label:   Friendly name of connection
  • In my case I named it: CRM2011
• Discovery Url:   Base url of CRM
  • I used: http://crm-demo/
• User Name: Domain Account with sufficient rights in CRM 2011
  • In my case I used: LABAdministrator

Once everything is filled in, press Connect and wait until the discovery is finished. Once finished double click on the organization name (in my case: Motion10 Lab Environent ) and wait for the objects to be loaded.

Once the objects have been loaded; you should see a screen similar to the one depicted here below:

Now let’s add our ‘Custom Activity or plugin’. Do this by selecting the ‘Register’ tab and clicking on ‘Register new Assembly’

The ‘Register New Plugin’ screen will popup and click on the ‘Browse (…)’ button.

Now browse to the bin folder of the example project “SendCrmEntityToEndPoint“ (the one you compiled earlier) and select the SendCrmEntityToEndPoint.dll file and click on ‘Open’

Once done, select the option “None“ at step 3 and select the option “Database“ at step 4 and press the button ‘Register Selected Plugins’

Once done you should receive feedback that the plugin was successfully registered.

Creating a workflow in CRM2011 which uses the custom activity.

Once you’ve logged on to CRM2011, click on ‘Settings’

Now find the ‘Process Center’ section and click on ‘Processes’

In the main window, click on ‘New’

A dialog window will pop up; fill in the following details and once done press OK:

• Process Name: Logical name for this workflow
  • I named it: OnAccountProspectStatusExport
• Entity:  Entity which could trigger this workflow
  • I used the Account Entity
• Category: Select WorkFlow

A new window will pop up; which is used to define the actual workflow. Use the following settings:

• Activate as: Process
• Scope: Organization
• Start When:
  • check Record is created
  • check Record fields change and select the field RelationShipType

• Now add the following step: Check Condition

• Set the condition to be
  • Select “Account”
  • Select Field “RelationshipType”
  • Select “Equals”
  • Select “Prospect”

• Now add our custom activity the following step: SendCrmEntityToEndPoint

• Configure this activity like this:
  • Export to disk:  True
  • EndPoint location: <Path where entity needs to be written>
    • In my case I used: c:temp (note this will be written on the c drive on the CRM server!)

• Now once again add our custom activity the following step: SendCrmEntityToEndPoint

• Configure this activity like this:

• Export to disk: False
• EndPoint location: Url path to your BizTalk webservice
  • In my case I used: the endpoint which points to my generated BizTalk WebService (which we will cover in our next blogpost)

Well at this point your workflow should look similar to this:

Now click on the ‘Activate’ button

Confirm the ‘Activation’

Save and close the new workflow

Test if everything works

• An Account.xml file somewhere on disk
• An Routing Error in BizTalk (as we send a document which was not recognized by BizTalk)

In CRM2011 click on the ‘Work Place’ button

Subsequently click on ‘Accounts’

And finally add a new ‘Account’, by clicking on ‘NEW’

A new window will pop-up; fill in some basic details

and don’t forget to set the Relationship type to ‘Prospect’

Once done click on the ‘Save & Close’ button

After a few minutes we can check both our output directory and the BizTalk Administrator, and we should notice that in the output directory a file has been written

and we should have an ‘Routing Failure’ error in BizTalk.

Closing Note

Hope you enjoyed the read

 Cheers

 René